How to fix windows 10 update download stuck at 99 or % – Any other Options?
The PC does not have enough space to install Windows 10 updates. Free up space on the OS partition and try again. 0xc, There is a problem. replace.me › › Windows 10 Installation and Upgrade. If you’re encountering problems installing Windows 10 Update via can manually install it (you can do this with the FREE version).
Windows 10 version 1903 stuck free
The PC does not meet the minimum requirements to upgrade to Windows Upgrade the PC hardware if possible or replace it. The PC does not have enough space to install Windows 10 updates. Free up space on the OS partition and try again. There is a problem with the download or installation files in the update. No action is needed; the system will try again later.
A previous update is still in the cleanup process, usually awaiting a restart. Try restarting Windows and then attempt to install the new update again. If it fails, try using the Disk Cleanup utility, restart the PC, then attempt to update again. The current drive does not support a specific disk operation. See detailed Windows 10 requirements to ensure the disk partition or volume can meet any of those applicable requirements.
If not, replace the drive. You can even uninstall it and can opt to install it once again after you have installed the Windows update successfully. Another issue that can cause the problem on your Windows 10 device will be to check if the regional settings are correctly configured. Another option would be to clean boot your computer and try installing the updates fresh.
This can be an excellent option if you have any third-party applications that may be affecting the proper functioning of the Windows Update on your system.
The methods outlined here should ideally help you resolve the issue favorably in most of the cases. Check out the tips shared here and share your experiences on which among them addressed the update issues on your Windows 10 device. By IG Share. Windows 10 May or version Update stuck at downloading Microsoft has already started and almost completed the Windows 10 version rollout.
What’s your reaction? In Love. Not Sure. You may also like. Windows 10 Where do I right-click to get the taskbar menu when the taskbar is full? By Das. Comments are closed. More in: Windows I have googled and tried many ways: manually updating with Windows 10 Update Assistant, turning off antivirus, disabling IIS Cannot Update Windows 10 Update get stuck with error code 0xC – 0x Logs provided below, any advice how to solve this without doing a clean installation?
I had also gotten 0xXAB before. I have uninstall anti-virus and anti-spyware, tried MCT, To install Windows restart the computer and then restart the installation” 1. I tried “Windows 10 Update Assistant” 2. Update through “Windows built in updater” They list the updates for under DHC. Good luck, not sure if it may help ease your frustrations. I expect this is actually a GB issue. Joe Purvis June 16, am. I was very hopeful when I saw this post. So I installed the F9 fix and tried again — failure.
Tapping the on off button simply turns it off instantly. When I turn it back on, it immediately decides it has failed and returns everything back to with the same error messages as before. I tried again with faststart turned — no joy. Same result. This is getting really boring…. Joe Purvis June 14, am. I uninstalled both Intel and Nvidia drivers, and also uninstalled my Killer Wifi card someone indicated that removing Wifi card helped.
I also removed half of my RAM, since the same person indicated that removing ram helped. This left laptop with 16 GB of ram. I ran setup from local drive, using the ISO files I had downloaded yesterday. Same outcome and same error messages I got last night 0xc 0x I am beginning to think I will be on forever. Of course, Microsoft will try to install every day — since one can now only delay updates for week.
Joe Purvis June 14, pm. Video is on processor and Nvidia m. OS is Windows Pro Fast boot is disabled. Only device attached is USB mouse. Note, I did try installing with that removed, using the touchpad — no joy.
I ran setupdiag. Chkdsk finds no errors. This morning, Windows Update has gifted me with yet another download of , which is awaiting reboot. I suppose I will let it, so that in 90 minutes or so, after I restore following the crash, I can get back to using Most of the drivers posted on the gigabyte site for this model are woefully out of date.
I checked the Samsung site previously and again today. Most recent firmware is installed for all SSDs. I checked all drivers using two different driver update programs as well as checking the site of the manufacturer of the device Intel, Nvidia, Killer,… It would be REALLY helpful if one or another of the error message codes would actually provide a hint about what is going on.
Microsoft site doesn’t list any issues that would be consistent with this problem. BTW, I tried installing with Virtualization turned off in bios. No joy. I do not think this is a problem with my hardware — this machine has sailed through all the other updates without issue, and has been very stable with I wish there was a way to ask Microsoft.
Joe Purvis: I’m really sorry for your issues. Here are some other things you can try: 1. If you have a second hard disk or an SD card, then remove them. Disable the Driver Signature Enforcement. Shutdown the computer and manually start it on each reboot. Joe Purvis June 17, pm. I removed all other SSDs from the computer, leaving only the boot drive. Bios allows only for camera and network cards to be delegated to the “Smart Manager”, and not disabled. So, I disabled them with Smart Manager. I installed most recent USB smart backup and F9 fixes.
I could not permanently disable driver signature enforcement not allowed by secure boot , but I did reboot and disable signature enforcement for that reboot. Other than forcing shutdown with power switch when it locks, there is no separate opportunity to shutdown and reboot. I tried running update from local directory — hung at same place. Then, I got my daily update from Microsoft and ran it. Still hung. I will see if Gigabyte has any ideas.
Joe Purvis June 18, am. So far, no response from Gigabyte. I called Microsoft support. He connected with my laptop, changed a few files and configurations, and downloaded a “new ISO” and started that. Hung again in the same spot. Am waiting on hold to see if Microsoft has any other ideas. Tim M June 12, pm. Dan — try this: use the windows media creation tool, and create a USB. Do not try to install from the USB…that’s buggered.
Create a new folder on your computer on the desktop is fine , call it anything you want. Copy all the files from the USB to that folder. Joe Purvis June 11, pm. I am in the same position. I have tried everything above, and more. All drivers are updated multiple checks. Antivirus removed. Troubleshooter worthless finds nothing — likewise sfc. Error message is the nonspecific oxc Always hangs after first reboot.
I can get out and back to with Ctrl alt del. Couldn’t we have an update that works? Or useful error messages? Or a useful troubleshooter?
Joe Purvis June 12, pm. The complete error code from last night was “0xcx, safe OX Phase, error during boot”. I then confirmed that I could get into Safe mode I could. Then I tried Windows update. It downloaded KB and the update, restarted, and stopped in the same place locked at Gigabyte logo on first restart.
I could only get out by shutting town with power switch — they it restored KB is listed as having installed, and for the 10th time failed, with the singularly uninformative error code 0xc Any suggestions would be appreciated. Joe Purvis: This error commonly caused by drivers or by an encryption software. So, if you have enabled encryption, then disable it. Additionally, update the device drivers, especially for the graphics card and the network adapter s. Joe Purvis June 13, pm.
All of my drivers were updated prior to the second or third try — in addition to checking manufacturers sites, I used two different driver search programs — they agreed that all are updated. Graphics cards and wifi drivers are less than three weeks old — the most recent versions available. I have never used encryption on this machine.
I tried again from downloaded update files. Locked again: 0xcx “Failed in first boot with error during boot operation. I am attempting to update Windows 10 version I do want to note that I never got to the point of ” update complete – restart now”.
This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse.
Windows 10 version 1903 stuck free. How to Fix Windows 10 1903 Update Download Stuck at 99 or 100%
Any suggestions? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Cancel Submit. DaveM Independent Advisor. Hi Kathy Click the link below, then click ‘Update Now’ on that page to immediately get and bring your PC right up to date and bypass version Thanks for your feedback.
How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to DaveM’s post on January 17, Good morning, I have done the below.
Is this to be expected? Hi Kathy No, that is certainly not the way that update should complete. If that has been like that for 12 hours, you have no other option, press and hold the Power Button on your PC for 5 – 10 seconds to perform a hard shut down, then restart your PC That update will either have completed or it ill roll back.
In Windows 10, some built-in troubleshooters can be used to fix certain problems related to the Internet connection, hardware, playing audio, Windows Update, and more. To do this:. A common cause of the update problem is the incomplete download of the update. To fix your issue, you can force Windows to re-download the update. Sometimes Windows 10 version failed to install because of specific components of the Windows update.
Resetting them can be helpful to fix the issue. Open Command Prompt with admin rights. So, you can run the system file checker tools to have a check.
[SOLVED] Windows Feature Update to Fails – Driver Easy – Fix 1: Run Windows Update Troubleshooter
Sorry this didn’t help. Choose where you want to search below Search Search the Community. Faraz Ahmed Shaikh. I started upgrade to W10 V on my Dell Inspiron last night but its been more than 12 hrs and still not done. Any suggestions? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :.
Cancel Submit. This is one of the best options that can help assist you in resolving the issue and handling the Windows 10 Update to Windows 10 version without getting stuck in the middle. Ideally speaking, the DISM should resolve most of the problem without any issues. However, if you are still facing issues, it may be a good idea to opt for a third-party source. You can follow the steps here below to address the concern —. Once the ISO image is downloaded, double click on it to mount the image.
The source here is indicated as F:sourcesinstall. Replace it with the exact location of your source file that you have mounted your ISO file on. Well, those outlined above are a few select options that should be helpful enough in providing you access to a few fixes to take care of the Windows 10 version update.
While the issue may be resolved by following the above methods and fixes, a few minor teaks here should help you determine if in case if the problem is not much severe. Do note that the stuck download may not be an issue at all.
Leaving the update for a while may resolve the issue on its own. Check if leaving the update to complete on its own may take thee update forward and help you download the update without any problems.
It may be worthwhile to notice that a faster and reliable internet connection can be a great choice. A minimum disk space is yet another option that should need to check out. A minimum of 32 GB disk space would be a must to ensure the trouble-free update.
In some cases, the third-party antivirus may have been restricting the update from downloading and installing. Check if you can disable the anti-virus service. In fact, it cannot be disabled. You can even uninstall it and can opt to install it once again after you have installed the Windows update successfully. Another issue that can cause the problem on your Windows 10 device will be to check if the regional settings are correctly configured.
Another option would be to clean boot your computer and try installing the updates fresh. This can be an excellent option if you have any third-party applications that may be affecting the proper functioning of the Windows Update on your system.
The methods outlined here should ideally help you resolve the issue favorably in most of the cases. Check out the tips shared here and share your experiences on which among them addressed the update issues on your Windows 10 device. By IG Share. Windows 10 May or version Update stuck at downloading Microsoft has already started and almost completed the Windows 10 version rollout. What’s your reaction? In Love. Not Sure. You may also like. Windows 10 Where do I right-click to get the taskbar menu when the taskbar is full?
By Das. Comments are closed. More in: Windows Windows How to Resolve — Windows 10 Search not loading, showing blank window That should be one of the most common issues that you may come across when Interview Questions. Windows 10 is the latest operating system from Microsoft.
Ever since Windows has moved to Fix Application was unable to start correctly 0xc in Windows 10 While computers are designed to provide you access to a few smart tasks, you would How to Prevent Windows 10 from going to sleep mode?